There are many cases where a wheelchair ramp will be necessary for your building. A ramp is critical for allowing people to access more spots around your public building. It’s easier to install a ramp than a platform lift, elevator, or something more complex. REDD Team can provide ADA-compliant wheelchair ramps for public buildings that can meet your needs for a ramp.
We can build wheelchair ramps that meet the guidelines provided by the Americans with Disabilities Act. The ADA has various rules for ramps that you’ll need to meet, and we at REDD Team can create ramps that fit all these points without being hard to use.
Consistent Slope
ADA guidelines indicate your ramp should have a slope of 1:12 at the most. The slope must also be consistent throughout the whole ramp. Even if there’s a landing midway through the ramp, all runs must have the same slope.
If you let us at REDD Team know about your space limits, we’ll figure out the necessary slope for the ramp while keeping it within your space.
Width Plans
The ADA also states a ramp should be at least 36 inches wide. The width is measured based on the sides of the ramp. For cases where handrails are present, the width is based on the inside part of one rail on the ramp to the inside part of the other rail. While you can install handrails after getting the initial ramp ready, we recommend you build the rails and ramp together. REDD Team can work on both of these essentials for you.
How High Does the Ramp Go?
The next rule to follow involves how much rise the ramp will produce. The rise is the elevation change from the ramp’s start to the end. The ADA says your ramp can have a run of up to 30 inches in height. Therefore, if you have a 1:12 slope, you’ll have a ramp that is 30 feet long while going up 30 inches.
ADA-compliant wheelchair ramps for public buildings can feature as many runs as necessary, but the 30-inch height limit should be respected. You can always add landings in the middle if required.
Landing Plans
Speaking of which, you should also review the landings around a ramp. The landings on the top and bottom of the ramp should be at least 60 inches long and as wide as the run. The size allows people to get on and off the ramp while providing room for turns as needed.
There are many other ADA guidelines to explore, and our workers at REDD Team can help you see what your ramp will require to meet compliance. We can help you build ADA-compliant wheelchair ramps for public buildings that fit your space. You can reach us online or by phone at 800-648-3696 to learn how we can serve your needs for wheelchair ramps.
